Mamorubot Build Plate

Mamorubot Build Plate

from 28.00
  • 【Excellent Adhesion】Mamorubot 3D Printer Platform polypropylene Build plates Shows strong adhesion in printing. Easy to take off models by hand or with a little help from the scraper for very large models.

  • 【High Durability】Gest you out of the trouble when plastic film decreased viscosity after a period of usage.

  • 【Compatibility】Compatible with most FDM 3D printers

  • 【Easy to clean】The model's bottom will be smooth and the platform will be easy to clean by alcohol/water

  • 【Better than glass plate】Compatible with ABS, PLA, wood(or many other materials) filaments (sold separately); Allow to print on surface - no need additional adhesives or tape.

How to use:

Note: the build plate has different properties than a glass or mirror plate.
1) Remove old build plate
2) Make sure bed is level and flat in all directions
3) Install your new build plate and make sure it is securely fastened to the print bed.
4) If you have a heated bed, please heat bed to normal operating temperature for 5 minutes.
5) When bed is heated, double check for flatness.
6) Perform your leveling routine. Bed may require adjustments to level due to differences in plate thickness

7) Note that some adjustment to previous bed temperature settings may be required. Make test prints to verify proper adhesion.
8) Large build plate format (510mmX510mm) may require additional adjustments to the temperature.
9) Enjoy stress free printing with your new Mamorubot build plate!

Note: If you see reduction in adhesion, please clean with Isopropyl alcohol and a clean cloth.
Suggested Bed temperatures may vary depending on filament material.

Temperature settings for different filaments:

  • PLA: 50-70℃

  • Flexible filament: 50-70℃

  • ABS: 100-125℃ ( 110℃ is recommended )

  • PC: 100-130℃ ( 120℃ is recommended )

  • Nylon: 90-120℃ ( 110℃ is recommended )

  • PP: 100-130℃ ( 120℃ is recommended )

  • PETG: 50-70℃

Add To Cart